installation instructions


  • Check tire pressure

    Check tire pressure

  • Get cap started on the valve stem

    Get cap started on the valve stem

  • Twist the cap firmly using the key

    Twist the cap firmly using the key

  • Unscrew the cap and see it flash

    Unscrew the cap and see it flash

  • Re-attach

    Re-attach

  • Cap is now ready

    Cap is now ready

get cap started on the valve stem tire pressure led

step 1 - Check tire pressure

Set tire to the recommended pressure for your vehicle before attaching the Cap
get cap started on the valve stem tire pressure led

step 2 - Get cap started on the valve stem

Get the Cap started on the valve steam threads. Put the key into the grooves at the top of the valve Cap.
twist the cap firmly tire pressure led

step 3 - Twist the cap firmly using the key

Twist the Cap down firmly by hand all the way. Do not use any other tool than the enclosed key.
unscrew the cap and see it flash tire pressure led

step 4 - Unscrew the cap and see it flash

To verify proper installation, unscrew the Cap and you will see it flash.
re attach tire pressure led

step 5 - Re-attach

Screw the Cap back on firmly by hand all the way, using the key. If you leave the Cap loose it will result in a flat tire.
Cap is now ready tire pressure led

step 6 - Cap is now ready

The Cap is now in place and will monitor your tire pressure 24 h per day 7 days a week. Take the key out and store it in a safe place. Have a safe trip!